Whirlpool Side-by-Side Refrigerator Filter 4396710

Description

The Whirlpool side-by-side refrigerator filter 4396710 is intended for use in compatible refrigerators of this brand. It is part of the appliance’s water filtration path and supplies the water used by the dispenser and ice maker.

Features of the Whirlpool 4396710 Water Filter

The Whirlpool water filter (code 4396710) has a standard construction that reduces water contaminants and helps keep the appliance’s water system and solenoid valve working efficiently. With effective adsorption technology it improves the cleanliness and purity of the output water and is suitable for Whirlpool side-by-side refrigerator-freezers.

• Filtration capacity: 200 gallons (757 liters) of water
• Dimensions: 30.5 cm long with a 6.8 cm cross-section diameter
• Approximate weight: about 320 g
• Material: compressed activated carbon core of entirely plant origin, with a safe, standard (food-grade) body
• Filter location: can be installed in the lower or internal compartment of Whirlpool and Maytag side-by-side refrigerators with part number 4396710; push-fit connection mechanism
• Certifications: holds recognized international water health certifications, including NSF/ANSI standards 42 and 53

This filter has a direct effect on the clarity of the ice and the purity of the output water.

How to Install the Whirlpool Rocket-Type Refrigerator Filter

1. Turn off the refrigerator and shut off the water supply.
2. Open the filter compartment door at the bottom of the refrigerator. Turn the old filter 90 degrees to the left (counter-clockwise) to release it, then pull it straight out.
3. Remove the protective cap from the new filter. Align it with the groove in the base, push it in, and turn it 90 degrees to the right (clockwise) until it locks fully.
4. Turn the appliance on and run at least 2 liters of water through it to purge the air and make sure the water flows properly.

Frequently asked questions about the Whirlpool long dual-stage side-by-side filter

1. Is this filter compatible with older Whirlpool models?

Yes, it can be used in most Whirlpool side-by-side models. If in doubt, check your refrigerator’s exact model.

2. When should I replace the filter?

Depending on water conditions, usually every 6 to 12 months or after about 1,500 liters of water is a good time to replace it.

3. Is this model harder to install?

No, the installation process is similar to ordinary filters; it simply sits in a longer housing.

4. Is the Taiwanese version as good as the Korean versions?

Yes, if the product is sourced from reliable suppliers, it offers very good quality.